| Место происхождения: | Китай |
|---|---|
| Фирменное наименование: | BAXIT |
| Номер модели: | IPx1.2.3.4.5.6/IPx6K/IPx9K |
| Количество мин заказа: | 1 |
| Цена: | US $3100.0 - 5640.0 / Unit |
| Упаковывая детали: | Коробка коробка/деревянная коробка |
| Время доставки: | 5-8 рабочих дней |
| Условия оплаты: | LC,D/A,D/P,T/T,Western Union,MoneyGram |
| Поставка способности: | 1000 шт. |
| Внедрить стандарты: | ipx9k | Размеры внутренней коробки (WHD): | 800mm-1000mm |
|---|---|---|---|
| Давление дождевой воды: | 0,1 ~ 6 бПа, регулируемый | Объем подачи воды: | При давлении 4 бар скорость потока достигает 39,2 л/мин. |
| Выделить: | IPx1 waterproof testing chamber,rain simulation test chamber,industrial waterproof testing equipment |
||
Rain test chamber
According to the test standards and product requirements, the test parameters are set in the control system; subsequently, the water supply system is activated, and the water pump pressurizes the water in the water tank and delivers it to the spray system; the spray system, based on the set parameters, forms a specific rainfall scene through drip holes, swaying tubes or nozzles; the sample rotates on the sample holder or remains stationary on the holder, fully contacting the simulated rain; during the test, the control system continuously monitors various parameters to ensure the stability of the test conditions; after the test, the system automatically stops the water supply and spraying, and the operator can remove the sample for performance testing and analysis.
| Enforce Standards | IPx1.2 | IPx3.4 | IPx5.6 | IPx1.2.3.4 | IPx3.4.5.6 | IPx6K | IPx9K |
| Inner Box Dimensions (WHD) |
600MM | 600MM | 600MM | 600MM | 600MM | 600MM | 600MM |
| Enforce Standards | IPx1.2 | IPx3.4 | IPx5.6 | IPx1.2.3.4 | IPx3.4.5.6 | IPx6K | IPx9K |
| Inner Box Dimensions (WHD) |
800MM | 800MM | 800MM | 800MM | 800MM | 800MM | 800MM |
| Enforce Standards | IPx1.2 | IPx3.4 | IPx5.6 | IPx1.2.3.4 | IPx3.4.5.6 | IPx6K | IPx9K |
| Inner Box Dimensions (WHD) |
1000MM | 1000MM | 1000MM | 1000MM | 1000MM | 1000MM | 1000MM |
| Swing pipe water spray hole diameter | ∅0.4mm | ||||||
| Water spray hole spacing | 50mm | ||||||
| Spray ring radius | 300(mm) | ||||||
| Spray pipe diameter | ∅16mm | ||||||
| Swing pipe swing angle range | ±60°±90° | ||||||
| Swing pipe spray angle | ±60°±90° | ||||||
| Swing speed adjustment | 0~30RPM/min(Adjustable) | ||||||
| Rain test water pressure | 0.1~6bpa Adjustable | ||||||
| Water flow supply volume | At 4 bar pressure, the flow rate reaches 39.2 L/min | ||||||
| Test bench speed | 0~20rpm/min(Adjustable) | ||||||
| Test bench area | ∅400mm,Load capacity is 15 kg, and the sample rack is adjustable from 0-300 mm | ||||||
| Lead test hole | There are power lead test holes on the box body, allowing for external power connection. Additionally, the spray lamp lighting time can be adjusted | ||||||
| Box structure | 1. Both the inner and outer enclosures of the test chamber are made of SUS304 stainless steel plates. The surface of the outer shell is treated with sandblasting to create a textured finish, while the inner enclosure is a high-quality stainless steel mirror plate. 2. The spray water pipes are also made of stainless steel. 3. The working chamber and all other parts in contact with water are made of stainless steel or copper materials. |
||||||
| Control system | 1. Speed control device: Both the swing pipe and the rotating disc for speed control use imported frequency converters. 2. Main configuration: Water storage tank, water pump, pressure reducing and diversion device, pressure gauge, flow meter, spray pipe assembly, swing pipe swing amplitude driving mechanism, worktable rotation mechanism, electrical control system, visible tempered glass door, deceleration mechanism, etc |
||||||
| Widely used | Technical parameters: The climate environment has a significant impact on the aging of products, the fading of pigments, and the corrosion of metals. Therefore, aging tests are receiving increasing attention in industries such as rubber, plastics, chemicals, automobiles, and textiles. There are many factors in the climate environment, including sunlight exposure, temperature, humidity, and rain exposure. The waterproof test chamber is a device for simulating the rain exposure environment. | ||||||
![]()
Application fields
1. Electronics and Electrical Engineering Industry: Products such as mobile phones, tablet computers, smart watches, outdoor routers, sensors, etc., have their waterproof performance of the outer shells and interfaces directly affecting the product lifespan and usage safety. Through the rain test chamber, the sealing performance of the products in the rain environment can be tested to prevent water from seeping in and causing circuit short circuits or component damage.
2. Automotive Manufacturing Industry: Lamps, sensors, connectors, window seals, engine compartment components of automobiles, etc., all need to function normally in rainy days or during car washing scenarios. The rain test chamber can simulate scenarios such as heavy rain and high-pressure car washing to test the waterproof performance of these components, ensuring the driving safety of automobiles in complex weather conditions.
3. Aerospace Industry: Aircraft and satellite equipment in the aerospace sector will encounter various harsh weather conditions during flight, such as rain, snow, and ice. The rain test chamber can simulate the high-altitude rainfall environment, conducting waterproof tests on the equipment's casing, interfaces, and electronic components to ensure the reliability of the equipment in extreme conditions.
4. Medical equipment industry: For instance, outdoor first-aid equipment, surgical instrument disinfection equipment, etc., some of which need to be used or transported in humid or rainy environments. Rain testing chambers can test their waterproof performance to prevent rain from contaminating the equipment and affecting its usage effect, ensuring medical safety.
5. Outdoor Lighting Industry: Outdoor lighting products such as street lamps, landscape lights, and garden lights are exposed to the natural environment for a long time and therefore need to have excellent waterproof properties. Rain testing chambers can simulate different intensities of rainfall to test the sealing and insulation performance of the lamps, ensuring that the lamps can emit light normally and without any safety hazards during rainy days.
Details presentation
![]()
Physical picture
![]()
FAQ
1. who are we?
We are based in Shanghai, China, start from 2017,sell to North America(20.00%),Western Europe(15.00%),South
America(10.00%),Oceania(10.00%),Northern Europe(10.00%),Eastern Europe(10.00%),South Asia(5.00%),Southern Europe(5.00%),Central
America(5.00%),Africa(5.00%),Southeast Asia(5.00%). There are total about 5-10 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Differential Scanning Calorimeter, Thermogravimetric Analyzer, Differential Thermal Analyzer, Oxygen Bomb Calorimeter, Spot Cooler
4. why should you buy from us not from other suppliers?
We have 10 years of experience in design and development. The price preferential benefit There is a lot of goods in stock The
service is good
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,DDU,Express Delivery,DAF;
Accepted Payment Currency:USD;
Accepted Payment Type: T/T,Credit Card,Western Union;
Language Spoken:English,Chinese